| Possible safety issues | Protective Measures |
| When cutting, clothing, gloves, and longhair are easily entangled in to the high-speed running machine. | Do not wear gloves to operate when rotary cutting. Please hide your longhair in the work cap. Always pay attention not to let clothes contact rotating parts. |
| Improper use of cutting tools can damage itself, accessories fly out and cause injuries. | Read the catalogue and safety standards before use. Please wear safety glasses and protective clothing. |
| Direct contact with the sharp edge of the tool may cause human body injuries. | Please wear gloves and other labor protection appliances when loading and unloading cutting tools. |
| Chips during cutting may cause scratches and scalds to human body. | Use cleaning instruments to remove chips in time. Please wear protective glasses, protective clothing and gloves. |
| The burr and other defects on the processed part are very sharp and easy to scratch the human body. | Do not touch the burr and other defects on the machined part. Please wear protective clothing, gloves and other labor protection appliances. |
| lf the machined part is directly cut without clamping, it will cause damage to the tool and pattern of the machined part | The machined part must be clamped. Please wear protective glasses, protective clothing and gloves. |
| lf the insert or its accessories are not clamped properly, the cutting tool may fall of and fly out, causing injuries. | Before machining, make sure that the insert and other accessories have been fastened properly with proper tools. |
| During high-speed cutting, chips lying out at a high speed may cause injuries. | Use safety cover, protective screen, outer cover, etc. Please wear protective glasses, protective clothing and gloves. |
| When the insert or its accessories are at a high speed, they may fall of and ly out under the action of inertial centrifugal force, thus cause injuries. | Please use cutting tools according to the range recommendation. Please wear safety glasses and protective clothing. |
| The edge of the milling cutting tools is sharp, and direct touch by hands may cause scratches. | When touching cutting tools, please wear gloves and other labor protection appliances. |
| Excessive wear and severe impact increase the cutting resistance, which may break the tool to splash, and lead injuries to the operator as a result. | Replace excessively worn cutting tools in time. Please wear safety glasses and protective clothing. |
| Sparks and high temperature chips generated during cutting may cause fire and explosion. | Remove flammable and explosive materials in the cutting area. Prepare fire-fighting equipment. |
| Poor balance of the fixtures will cause severe vibration to running machines at a high speed, and as a result damage the cutting tools. | Before cutting, check looseness or abnormal sound of the equipment. Please wear safety glasses and protective clothing. |
| When the auxiliary tools such as bolt or pressing plate are over-tightened, the insert or the tool may be damaged and splashed. | Do not over tighten by auxiliaⅣ tools such as sleeves. |
| The tools with eccentric rotation or poor balance may shake or vibrate during rotary processing, which may cause damage and scattering. | Please use the tool within the speed range allowance. Regularly check the balance performance of the machine. |
| When drilling with extremely small cutting tools, it is easy to break the tools, splash and failure to take out. | Reduce the vibration of the tool and process at a suitable running speed. Please wear protective glasses, protective clothing and gloves. |
| Violating the regulations to use the tool will increase wear of machine and cutting tools, and cause other hazards. | Please use according to the instructions and regulations. |
Remark: The accident caused by tools or using it for other purposes without our permission shall be borne by yourselves.
